EMG 45TW
SKU: 006-02020
4,500 ฿
5,000 ฿
Inside the EMG 45TW are two distinct tonal options: a single coil and a humbucker with EMGs noiseless preamp. The single-coil mode is our JCS pickup built with ceramic magnets and steel pole pieces for a rich, warm tone. The humbucker mode is our popular CS (ceramic steel) dual-coil for a big, aggressive sound with a pronounced mid-range. A push/pull volume (or tone) pot allows you to change from the rich clarity of a J pickup sound to the fatness of the CS humbucker. This six string bass pickup uses a 45 Extended housing that is 4.5 inches (115mm).
When using two of TW Pickups in the same instrument it is not recommended that our BT or BQ Systems be used. Each pickup requires a push/pull pot for switching from single coil to humbucker, so the balance control included with the system can'’t be installed. If you want to use the balance control, consider switching single/dual coil outputs with a DPDT toggle switch(s) instead.
IN THE BOX
PACKAGE INCLUDES EMG'S EXCLUSIVE SOLDERLESS INSTALL SYSTEM:
1 25K VOLUME POT
1 25K TONE POT
1 BATTERY BUS
1 STEREO OUTPUT JACK
1 PAIR MOUNTING SCREWS
1 PICKUP CABLE
2 CONNECT CABLES
1 OUTPUT CABLE
1 BATTERY CABLE
When using two of TW Pickups in the same instrument it is not recommended that our BT or BQ Systems be used. Each pickup requires a push/pull pot for switching from single coil to humbucker, so the balance control included with the system can'’t be installed. If you want to use the balance control, consider switching single/dual coil outputs with a DPDT toggle switch(s) instead.
IN THE BOX
PACKAGE INCLUDES EMG'S EXCLUSIVE SOLDERLESS INSTALL SYSTEM:
1 25K VOLUME POT
1 25K TONE POT
1 BATTERY BUS
1 STEREO OUTPUT JACK
1 PAIR MOUNTING SCREWS
1 PICKUP CABLE
2 CONNECT CABLES
1 OUTPUT CABLE
1 BATTERY CABLE