TC Helicon Voicetone T1

SKU: TE-996003005

5,200 ฿
Single-Button Stompbox for Studio Mastered Vocal Tone
  • Single-button stompbox gives your live voice a recorded sheen with automatic adaptive Tone control

  • Uses TC Helicon Adaptive Tone technology for perfect EQ, compression, de-essing and gating

  • Shapes and controls your vocal sound to sit perfectly in the mix, plus gives you the freedom to adjust the compression and EQ shaping

  • Simple 2-knob control gets you up and running in seconds

  • High-quality, low-noise mic preamp for pristine vocals

  • On/off foot switch for quick performance control

  • Warmth button toggles just the right amount of additional low-frequency fullness into your vocal sound

  • Allows chaining to other VOICETONE SINGLES vocal processors or DITTO MIC LOOPER to expand creative possibilities

  • Compatible with remote Mic Control using the TC Helicon MP-75 microphone

  • Rugged, road-worthy construction for years of dependable use

  • Power supply included

Put Your Best Vocal Tone Forward
Put Your Best Vocal Tone Forward

VOICETONE T1 automatically reacts to your voice and applies studio-quality dynamics and EQ to bring out your most-exciting vocal tone. Now you can put a recorded sheen on your live singing – without the setup and adjustment of complex equipment normally required to achieve “that sound”.

It’s Just this Simple...
It’s Just this Simple...

    •    Plug in your mic, plug your pedal into the mixer & set the gain
    •    Turn on the effect
    •    (That’s it)

Of course, you can always change the style or the amount of correction, but you shouldn’t need the manual – unless you’re making a fire!

Chain It
Chain It

You can chain VOICETONE T1 to all of the other VOICETONE singles, mixing and matching effects to define your personal sound. It also works with DITTO MIC LOOPER, the pure looping pedal for singers and instrumentalists. Use the Singles Connect Kit (available separately) to mix and match up to 4 TC HELICON vocal effect pedals together conveniently, simply – and with less cable clutter than ever before.

Under The Hood
Under The Hood

Beneath VOICETONE T1’s sturdy, die-cast metal case, you’ll be getting the same quality processing you’ve come to expect from our flagship VoiceLive® vocal processors. You’ll also find a clean, quiet mic preamp that rivals high-end touring mixers, plus studio-quality analog to digital conversion. There’s even a USB connection for firmware updates.

Unforgettable Tone
Unforgettable Tone

1. Control multiple bands of EQ to reduce ‘muddiness’ and add brightness
2. Add studio polish, reduce vocal peaks and unwanted T, S and D sounds
3. Add warmth & fullness – without making your voice sound muddy
4. Dedicated on-off switch and USB connection for updates

More Mic, More Control
More Mic, More Control

You can completely control VOICETONE T1 from your mic – simply plug in a TC HELICON MP-75 microphone (sold separately). We call it Mic Control, and it allows you to command both the stage – and the audience!


SPECS

Design
Size

Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)

Weight

Weight: 0.92 lb. (0.42 kg)

Construction

Two part dies cast metal
Rubberized base

Connections
Analog Inputs

Connectors, balanced: Mic.: XLR
Mic Input Level @ 0 dBFS: -42dBu to +1dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu
Mic input SNR: >104 dB
Phantom Power: 24V (always on)
Guitar Input impedance: 1 MOhm
Guitar Input Level @ 0 dBFS: -7 dBU to 17 dBu
Guitar Input SNR: >115dB
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz

Analog Outputs

Output Impedance, Bal./Unbal.: 200/100 Ohm
Output Full Scale: +1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz

Control

USB for firmware and control
Mic Control using TC Helicon MP-75 Microphone or Sennheiser e 835 fx mic

Safety And Regulations
Power

Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W

Safety

EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA

Environment

Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing

What's in the box?

Region specific power supply
USB cable
User guide

You may also like

Recently viewed